The FG-RELAYS is a Digital External Relays Box. It works as a satellite device of the FG-NET Digital Unit. It adds a set of 24 configurable external relays to the FG-NET. It allows FG-NET to drive external devices such as solenoid valves, BMS signals, beacons and others, to react in case of leak or system alarms.
The FG-RELAYS is monitored by FG-NET via a standard Ethernet network. The FG-RELAYS is accessible via a web interface for configuration.
In the event of a fault on the sense cable
FG-RELAYS
FEATURES
- FG-RELAYS is accessible via a secure web interface to configure pairing codes, user and admin passwords, box name and network parameters. (For the detailed FG-RELAYS settings refer to FG-NET Operation & Installation Manual chapter IV.)
- Each FG-RELAYS contains 24 configurable relays. Every relay has a normal open (NO), a normal close (NC) and a common (COM) terminals.
- Up to 16 FG RELAYS boxes can be managed by one FG-NET allowing for a maximum of 384 (24x16) additional relays.
- In case of leak or cable break alarm, external relays are configurable from FG-NET Digital Unit ‘‘Set up’’- ‘‘Architecture’’ menu.
- In case of more than one FG-RELAYS boxes are connected on FG-NET, they are presented as FG-RELAYS #1, FG-RELAYS #2 and so on displayed on the FG-NET Digital Unit.
BENEFITS
- In addition to the nine relays by default on the FG-NET Digital Unit, the numerous configurable external relays on FG-RELAYS give more possibilities to drive several external devices.
- For each sense cable, the user can create a list of relays to activate in case of leak or cable break alarm.
- The connection between FG-NET and FG-RELAYS is done through the existing TCP/IP network. Thus no physical jumper cable or distance limit between FG-NET unit and FG-RELAYS.
- FG-RELAYS box status can be viewed on the FG-NET Digital Unit. In case of box disconnected, FG-NET displays an alarm and the general relay is activated.
TECHNICAL DATA
| Compatibility | Not a stand-alone unit, only to use with FG-NET digital unit |
| Dimension | W: 228mm H: 303mm D: 67 mm ( same enclosure as FG-NET) |
| System Capacity | Up to 16 FG-RELAYS + 16 FG-BBOX (refer to the FG-BBOX datasheet) can be connected to 1 FG-NET |
| Supply Voltage | 100-240VAC 1.3A 50/60Hz |
| Max. Power Consumption | 50W |
| Working Temperature Range | -15°C to 55°C |
| Working Humidity Range | 5% to 80% non-condensing |
| Relay Types | Volt free contact (NO, NC, COM) |
| Connectivity | RJ45 |
| Max. Switching Voltage | 125VAC and 220VDC |
| Max. Switching Capacity | 60W (30V x 2A) |
| Ingress Protection | IP40 -Indoor use only |