The FG-ECP-M is a Point Sensor for water leak detection equipped with two stainless steel probes. It is designed and ideally suited for high humidity environments or for zones where leaks are frequent. With its ingenious design of two probes being separated by 2 centimetres, it offers particularly good resistance to the false alarms caused by the humidity, at the same time, it triggers simultaneously an alarm when both probes are in the contact with leaking water. It is designed to be used with
FG-ECP-M
FEATURES
- Up to 40 FG-ECP-M can be connected to one circuit of the digital unit.
- The digital communication is made with a length of TTK bus 8723 connected to various FG-ECP-M and the digital unit.
- PG7 glands on the box sides make jumper cabling quick and easy.
- IP 68 protection marking. FG-ECP-M is protected against dust and water.
BENEFITS
- The FG-ECP-M point sensor quickly detects a liquid leak as soon as it creates contact between the two probes.
- The FG-ECP-M point sensor checks the correct functioning of the probes and warns in case of malfunction.
- The stainless steel probes design offers very good resistance to false alarm in high humidity environment.
- The FG-ECP-M is small and light. It is idealy suited for environments as plantrooms, bunded areas, drip trays, etc. (It is strongly recommended to avoid direct contact between the probes and the metal surface.)
- A simple bi-annual test is all that is required.
TECHNICAL DATA
| Compatibility | Digital units: FG-SYS, FG-NET, FG-BBOX |
| Enclosure | ABS flame retardant UL94V0 |
| Operating Temperature | 0°C to 50°C |
| Stainless Steel Probes Diameter | 20 mm |
| Protection Rating | IP 68 |
| Dimensions (W, H, D) | 105 x 75 x 55 mm |
| FG-ECP-M Colour | Blue |