The TTK digital sense cable FG-AC detects and pin-points the location of water, acid and corrosive chemical liquids at any point along its length.
The FG-AC sense cable is designed for the FG-SYS or the FG-NET digital units to respond intelligently in the event of any leaks of liquids.
The FG-AC sense cable is installed in critical areas in order to provide permanent protection to limit the financial consequences of an undetected water and acid leak. The typical application are in laboratories
FG-AC
FEATURES
- Available in standard and pre-connected lengths of (3, 7 and 15 m). They can be interconnected to provide an expandble network of leak
detection. - Each FG-AC sense cables contain an embedded microprocessor, it intelligently monitors the cable status, it provides continuous realtime communication to the TTK digital units.
- Each cable has a high visibility LED to provide quick green/red
identification of the cable status:
- Green LED: normal status, no alarm raised;
- Red LED: leak detection on the cable;
- LED off: cablebreak on this or any upstream cable.
- Small diameter, light, flexible and in an easily identifiable green and white colour.
- Ingenious design: four conducted wires of helical construction, compressed and connected on an extruded central core, insensitive to dust contamination, preventing false alarms.
- Fixing clips available to fasten the sense cables.
- A set of Belden 8723 jumper cables and connection accessories
- gives continuity to each circuit.
BENEFITS
- Detects and pin-points the location of water and acid leak to the nearest meter along the length of the cable.
- Detects and localizes cablebreak on the cable.
- Short drying time.
- The FG-AC sense cable is a non-absorbent design that can be reused after leaks, reducing the maintenance costs.
- Easy installation with pre-finished male and female connectors.
- Flexible design: in both liner and sector mode (via FG-DTC box).
TECHNICAL DATA
| Compatibility |
Digital units: FG-SYS, FG-NET, FG-BBOX Diversion box: FG-DTC |
| Operating Temperature | -40°C to 60°C |
| Min. Bend Radius | 20 mm |
| Max. Length of Digital Sense Cable per unit | Up to 120 lengths of FG-AC, Connected to 3 circuits |
| Connector Type | FCI-Clipper |
| Weight | 25 g/m |
| Sense Cable Diameter | 8 mm with PVDF jacket |
| Four Sensor Wires Diameter | 1.2 mm with PVDF jacket |
| Core Material | Flame-retardant low-smoke PEBD-based polymer |
| Liquid Quantity to Active Alarm | 50 - 100 mm on the sense cable |
| Drying Time | 10 seconds after drying the sense cable |
| Breaking Strength for Sense Cable | Min. 75 Kg |
| FG-AC Colour | White and green |